Compact
Conductivity Meter
B-173
Conductivity
measurement has just taken a giant leap forward
1.
The sensor
The
cartridge-type sensor can be easily replaced if necessary.
2.
HOLD button
When
pressed during measurement, the current value will be held. If the
Power On button is pressed simultaneously, the value will be held
automatically after stabilization.
3.
CAL/MODE button
Press
the Cal/Mode Button to switch between calibration mode, salinity
mode, and conductivity mode.
4.
Power button
Turns
power on and off. If the power is not turned off within 15 minutes
after last use, it will automatically turn itself off.
1.
Conductivity/Salinity Display
When
the conductivity value is above 20 mS/cm or the salinity is above
1.1%, the display will flash.
2.
Battery Alarm
Alters
you when the battery is low.
3.
Hold Mark
Appears
to indicate the measurement value is being held. During Autohold
mode, the mark will flash.
4.
Temperature Alarm
The
"°C" indicator will light when the sample is below
5°C or above 35°C.
5.
Calibration Mark
Appears
during calibration.
6.
Stability Mark
Appears
when the measurement value has stabilized.
7.
Salinity Display
8.
Conductivity Display
Twin
Cond is HORIBA's unique conductivity meter which features a
waterproof flat sensor. Twin Cond is convenient for small sample
measurement in the laboratory, and field measurement in rivers and
lakes. It features autoranging and a measurement range from
1µS/cm to 19.9 mS/cm. It also has advanced function such as
one-touch auto-calibration, automatic temperature conversion
(compensation temperature: 25°C), manual and automatic hold
functions. and a salinity conversion function (from 0 to 1.1%).
|
